APM 2.8 Basic Flight Controller kit with GPS Module Combo Kit

APM 2.8 Flight Controller 2.5 2.6 Upgraded Built-in Compass for FPV RC Drone Aircraft is the new APM 2.8 flight controller. The sensors are exactly the same as the APM 2.6 flight controller; however, this has the option to use the built-in compass or an external compass via a jumper. This makes the APM 2.8 ideal for use with multicopters and rovers. The universal vibration damping mount, or shock absorber, has a list of useful applications. This is free camera mounting to flight controller isolation. It absorbs vibration; the center-supported plate is ideal for sensitive electronics and cameras. The flush flat-bottom mounting allows bolt or tape style attachment. A new generation Ublox GPS NEO-M8N, with low power consumption and high precision, the ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N's 1.4-1.6 meter accuracy; it supports GPS/QZSS L1 C/A, GLONASS L10F, and the BeiDou B1 protocol, and more. The GPS Folding Antenna Base mount comes with a laser-cut adhesive pad to quickly attach your GPS module, while the mount itself can be fixed to your craft using the base plate M3 hole or the cross slides. The APM 2.5 Power Module is a simple way of providing your APM 2.5 with clean power from a LiPo battery as well as current consumption and battery voltage measurements, all through a 6-pos cable. Specifications and Features: APM 2.8 Flight Controller: 1. Needle: straight. 2. Power supply: LP2985-3.3. 3. Max voltage: 16V. 4. Add a 47 uF tantalum capacitor. 5. Port: MUX (UART0, UART2, MNNI2, and OSD are optional; OSD is the defaulted output). 6. Arduino Compatible! 7. Includes 3-axis gyro and accelerometer, along with a high-performance barometer 8. Onboard 4-megabyte dataflash chip for automatic data logging. 9. Optional off-board GPS, a u-blox LEA-6H module with compass. 10. One of the first open-source autopilot systems to use Invensense’s 6 DoF Accelerometer/Gyro MPU-6000. 11. The barometric pressure sensor was upgraded to MS5611-01BA03 from Measurement Specialties. 12. Atmel’s ATMEGA2560 and ATMEGA32U-2 chips for processing and USB functions, respectively. Glass Fiber Flight Controller Anti-vibration/Shock Absorber Set: Features: 1. Color: Black 2. Material: Glass fiber 3. Suit for different open-source flight controller, like APM 2.5/2.6/2.8, KK, MWC, and Pixhawk 2.4 Packaging Details: 1. Package Weight: 24 gm. 2. Upper Frame size: 90 x 60 x 2 mm (LxWxH). 3. Lower Frame Size: 100 x 70 x 2 mm (LxWxH). 4. Shock absorber Height: 10 x 12 mm (DxH). NEO-M8N GPS Module: 1. Receiver type: 72-channel u-blox M8 engine. 2. GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1. 3. SBAS L1 C/A: WAAS, EGNOS, MSAS. 4. Galileo-ready E1B/C (NEO-M8N). 5. Nav. update rate 1 Single GNSS: up to 18 Hz. 6. Concurrent GNSS: up to 10 Hz. 7. Position accuracy: 2.2 m CEP. 8. Acquisition 2 Cold start: 26 s. 9. Aided starts: 2 s. 10. Reacquisition: 1.5 s. 11. Sensitivity2 Tracking & Nav: –167 dBm. 12. Cold start: –148 dBm. 13. Hot starts: –156 dBm. 14. Assistance: AssistNow GNSS Online. 15. Assist Now GNSS Offline (up to 35 days) 3. 16. Assist Now Autonomous (up to 6 days). 17. OMA SUPL & 3GPP compliant 18. Oscillator TCXO (NEO-M8N/Q). 19. Crystal (NEO-M8M). 20. RTC crystal built-in. 21. Noise figure on-chip LNA (NEO-M8M). Extra LNA for. 22. lowest noise figure (NEO-M8N/Q). 23. Anti-jamming active CW detection and removal. 24. Extra onboard SAW bandpass filter (NEO-M8N/Q). 25. Memory ROM (NEO-M8M/Q) or Flash (NEO-M8N). 26. Supported antennas: active and passive. 27. Odometer travelled distance. 28. Data logger for position, velocity, and time (NEO-M8N). GPS Folding Base Antenna set: 1. Material: CNC Aluminum alloy, carbon glass fiber rod 2. Mounting rod diameter: 4 mm 3. length of rod: 14 cm. 4. GPS plate diameter: 40 mm. 5. Base plate diameter: 35 mm 6. Mounting hole spacing: 16-35mm 7. Weight: 20g 8. Colour: Anodised black 9. Note: Adhesive pad is not included. APM 2.5.2/2.6/2.8 Pixhawk Power Module V1.0: 1. Max input voltage: 28V 2. Max current sensing: 90A 3. Voltage and current measurement configured for 5V ADC 4. The switching regulator outputs 5.3V and 3A max 5. 6-pos DF13 cable plugs directly to APM 2.5’s ‘PM’ connector 6. Support 6S battery Package Includes: 1 x APM 2.8 Flight Controller. 2 x Connecting Wires. 1 x Glass Fiber Flight Controller Anti-vibration/Shock Absorber Set. 1 x NEO-M8N GPS Module with translucent shell. 1x GPS Folding Base Antenna set. 1 x APM 2.5.2/2.6/2.8 Pixhawk Power Module V1.0.