AI Powered
Browse our complete collection of electronics, robotics, and DIY components

• Processor: STM32H743VIT6 running at 480MHz with 2MB Flash. • Sensors: Dual IMU setup featuring BMI088 and BMI270 for high stability. • Power Input: Supports 2S–6S LiPo batteries (6.0V–27V). • ESC Output: Continuous 70A current per motor, powered by AM32 firmware.

The HGLRC M100 MINI GPS is a compact and high-performance positioning module designed to deliver fast and precise location tracking for FPV drones. Powered by the latest 10th-generation UBLOX chip, it ensures quick satellite acquisition and accurate positioning, enhancing overall flight reliability. Its ultra-compact 15×15mm size makes it ideal for a wide range of drone builds, especially 2–7 inch quadcopters where space and weight are critical factors.

Molicel Lithium-Ion Battery cell for hobby purpose or robotic applications. Very light weight and small size compared to Ni-Cd, Ni-MH and Lead acid batteries. Very long life without loosing charging capacity.

• Built-in ExpressLRS Backpack • High-efficiency cooling system • Wi-Fi and Bluetooth support • Packet rates up to F-1000Hz

• ExpressLRS, 8 PWM, voltage telemetry • Wi-Fi, WEBUI, 20 cm antenna • 4-pin CRSF, molded shell • 20cm high sensitivity antenna

If you are new in multirotor/drone hobby area and want to try out some basic multirotor designs so as to enhance your basic knowledge about multirotors!!! Don’t wait and get this combo of 8520 Magnetic Micro Coreless Motor for Micro Quadcopters – 2xCW & 2xCCW.

The next evolution of the rotor revolution is here!! The KK2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA is packing new found power with updated sensors, memory and header pins. The KK2.1.5 is next big evolution of the first generation KK flight control boards. The LCD screen and built in software makes install and setup easier than ever. A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go! All of which is done with easy to follow on screen prompts!

The Radiolink crossflight Flight Controller is an advanced and reliable flight control system designed for unmanned aerial vehicles (UAVs) and drones. It is a cutting-edge solution that combines high-performance hardware with intelligent software to deliver precise flight control and enhanced aerial capabilities.

APM 2.8 Flight Controller Board with Built-in Compass for Drone UAV Quadcopter is an advanced open-source autopilot controller designed for drones, quadcopters, fixed-wing aircraft, and autonomous robotic vehicles. Built on the ArduPilot platform, it provides reliable flight stabilization, navigation, and autonomous control using integrated motion sensors and a built-in compass. The controller supports GPS modules, telemetry communication, and multiple flight modes, making it suitable for UAV development, aerial robotics, and experimental flight control projects.

Pixhawk 2.4.8 Drone Flight Controller PX4 32 Bit Autopilot The Pixhawk 2.4.8 Drone Flight Controller PX4 advanced 32-bit CortexM4 ARM high performance processor, can run RTOS NuttX real time operating system Bus interface (UART, I2C, SPI, CAN) Integrated backup power supply and failure backup controller, the main controller can be safely switched to backup control Provide automatic and manual mode Provide redundant power input and fault transfer function.

BLS-MAX BLHeli Series 30A ESC – Brushless DC Motor Electronic Speed Controller with Oneshot (Original) is a high-performance electronic speed controller designed for precise and responsive control of brushless DC motors, featuring BLHeli firmware with Oneshot support, integrated 5V/2A BEC, high-speed motor handling up to 210,000 RPM (2-pole), and reliable current capacity, making it ideal for multirotors, RC planes, and other high-performance RC and DIY applications.

The RadioMaster XR4 Gemini Dual-Band ExpressLRS Receiver establishes a new benchmark in RC link reliability. By merging true dual-band RF hardware, Gemini packet combining, and native ExpressLRS performance this is incredible.

Display 128*64 Monochrome LCD Operational Voltage 6.6-8.4v DC Weight is 350 grams

This is SIYI A2 MINI Ultra Wide Angle FPV Gimbal Single Axis Tilt with160 Degree FOV. The A2 MINI Ultra Wide Angle FPV Gimbal Single Axis is a compact and efficient camera stabilization system designed for first-person view (FPV) applications. With a single-axis gimbal, it provides steady and smooth horizontal camera movement, enhancing video stability and quality. Its ultra-wide-angle capabilities allow for immersive and panoramic shots, making it an ideal choice for FPV drone enthusiasts and videographers seeking dynamic and breathtaking aerial footage.

CINEON series are born for cinematic. C35 cinewhoop drone designes for cinematic indoor and outside shooting. Axisflying researched cinewhoop marketing and discussed with some pilots. We spent some months to develop different guard’s structure and release innovation quick-release guard finally.

The RadioMaster T8L brings the power of ExpressLRS 2.4GHz into a clean, compact form — and is the first screenless radio controller officially supported by ExpressLRS.With high-precision quad-bearing Hall-effect gimbals, integrated USB-C charging, and simulator compatibility, the T8L is ready to go right out of the box. Setup is quick and easy through a web-based configuration tool that runs directly in Chrome or Edge — no display or external software required.

The Radiomaster TX16S MKII HALL V4.0 is a popular radio transmitter designed for radio-controlled models, and it’s often used in the RC hobby co Support EdgeTX and OpenTX EdgeTX is installed by default (Touch screen enabled). Note:Requires EdgeTX version 2.6.0 or OpenTX version 2.3.15 or later.mmunity. ExpressLRS is an open-source, low-latency, long-range RC link firmware,

Presenting Radiomaster TX12 MKII 2.4GHz Radio Controller – CC2500 Version. Many years ago, RadioMaster set out to create the very best compact radio in its class. The TX12 has become the go-to product for pilots who seek a powerful, dependable, and endlessly upgradable open-source radio in a small form factor.

The RadioMaster Pocket is a powerful, ultra-compact radio controller designed for FPV pilots, drone racers, and sim flyers. Despite its small size, it features full-size hall gimbals, EdgeTX firmware, ELRS protocol support, and excellent ergonomics. Available in multiple stylish colors and includes a premium transparent hard case..The RadioMaster Pocket is a small, lightweight radio that packs a big punch. It is available in version, MPM CC2500, and come preinstalled with EdgeTX firmware

The RadioMaster Pocket is a small, lightweight radio that packs a big punch. It is available in two versions, ExpressLRS versions come preinstalled with EdgeTX firmware. The Pocket is also equipped with removable stick ends and a foldable antenna, making it easy to transport and store. It is compatible with 18650 batteries, which provide long battery life for hours of fun.
Page 1 of 10